Solar Shades

Solar Shades in Whitestown by Whitestown Window Treatments

Cut the glare, keep the view, know the tradeoff

Call (317) 863-9966Get Free Quote
Quick Answer

What follows covers the practical side of this service: how it's measured, what changes the price, how long fabrication takes and what maintenance it needs once it's hanging.

  • Service: Solar Shades for Whitestown homeowners
  • Service area: Whitestown, IN and surrounding areas
    • The measure gets scheduled quickly. The build does not, because your fabric or shutter panel is cut to your numbers after you order. Two to five weeks is normal. Service calls skip that step entirely.
  • Insured and bonded
  • Serving Whitestown, IN since 2008
Solar Shades Services

Expert Solar Shades for Whitestown Homes

Solar shades are a glare product first, and Whitestown has an unusual amount of glare to deal with. The town sits on a flat, open section line grid of former row crop ground with I-65 running through it between exits 130 and 133, and the residential canopy is builder planted street trees 5 to 20 years old. Anson is the sharpest case in the county. Its residential edges now sit across from AllPoints at Anson, an industrial park whose Amazon building exceeds one million square feet with entitlement up to 8.5 million, so those elevations look onto very large, very reflective pavement with nothing softening it.

Openness factor is the whole decision and it's a tradeoff rather than a feature. A 1 percent fabric gives you the most privacy and the least view, a 10 percent fabric gives you the most view and the least glare control, and 3 and 5 percent sit between them. Choose the number by what the window is for, not by what sounds better. Two honest limits: a solar shade slows fading rather than preventing it, and NFRC attributes only 40 to 60 percent of fading damage to UV in the first place. It also won't darken a room. If you want a dark bedroom, this is not the product to argue into that job.

When to Call

Signs You Need Solar Shades

If you notice any of these in your Whitestown home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

A tall two-story window has never had anything on it

A south room is only usable before lunch

A monitor behind you catches sun every afternoon

You want the view kept and the glare gone

The kitchen island is too bright to work at

Patio glass throws light across the whole room

You squint through a video call at two o'clock

Furniture gets moved around to dodge the sun

Hardwood in front of south glass has lightened

A sunroom is bright to the point of squinting

Our Process

How Whitestown Window Treatments Handles Solar Shades

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Custom fabrication, two to five weeks

2

Full travel and tracking checked

3

Light gap disclosed per opening

4

Cassette or side channels decided

5

Motor and battery plan set

Real Project Photos

Solar Shades in Whitestown

Photographs from real solar shades jobs completed by our crew in Whitestown and surrounding areas.

Custom shades measured and installed in Whitestown
Scope of Work

What Solar Shades Includes

Every Whitestown job is documented item by item. Here is what the crew covers.

Every elevation walked and written down, because a west window and a north window don't get the same openness

Openness factor chosen per opening, 1, 3, 5 or 10 percent, rather than picked once for a whole house

Samples held against the actual glare at the hour that room is actually a problem

Fabric color decided alongside openness, since dark yarns read the view and light yarns bounce more light back at you

The view you'd be giving up shown to you through a real sample before the order, not described in words

Night behavior explained plainly, because with interior lights on the shade works in the other direction

Heat expectations set honestly, including what an interior product can't do once sun is already through the glass

Fade language kept accurate, since NFRC puts UV at roughly 40 to 60 percent of fading damage

Three widths and three heights per opening plus a corner-to-corner square check

Mounting depth measured for the tube, the brackets and a cassette if the roll is being hidden

Roll direction set, with reverse roll used where the fabric needs to stand off the glass

Light gap per side disclosed, and flagged as larger on shades over 120 inches or past a 4:1 ratio

Wide sun-facing spans reviewed for coupling so two tubes track together across one opening

Chain side chosen per window, with cordless and motorized offered where a chain doesn't suit

Every continuous cord loop unit gets its tensioner anchored rather than left hanging as a loop

Layering discussed where one fabric can't handle daytime glare and nighttime privacy at the same window

Hembar matched to the fabric so an open weave hangs straight instead of waving at the bottom

Each shade run full travel on install day and checked for centered tracking before sign-off

Pricing

What Solar Shades Cost in Whitestown

National category figures put stock shades near $60 to $600 a window and custom-fabricated shades roughly $250 to $2,600. Those are published national ranges rather than a quote for a house in Whitestown. Solar shades sit in the middle of that band and the openness number itself barely moves the price. What moves it is the weave and the yarn: a basic vinyl-coated polyester screen costs less than a fine-yarn or a metalized-backed fabric, and width drives everything as usual. Hiding the roll in a cassette adds. Motorization is priced separately, nationally $300 to $1,500 per window installed. Whitestown Window Treatments works from measured openings and real elevations in Boone County, never from an average.

By Product

How Solar Shades Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

1 percent openness: The tightest weave we normally hang. It cuts the most glare and gives up the most view, so the outside reads as a soft haze rather than a scene. Specify it on hard west glass where the afternoon is genuinely unusable.

3 percent openness: Strong glare control with some view left. It's the choice for a home office facing west or south where screens have to be readable through the afternoon, and it's the one people are usually happiest with on the worst window in the house.

5 percent openness: The everyday middle. It keeps a usable view of a yard or a street while taking the hard edge off direct sun. This is the default we start from on most openings before a specific elevation argues us up or down.

10 percent openness: The most open weave, which means the best view out and the least glare control. It suits a north or east window where you want the fabric mostly for daytime privacy and some sun softening rather than for fighting an afternoon.

Dark fabric colors: Charcoal and bronze absorb light rather than scattering it, so the weave holes read as small clear windows and the view through is noticeably better. The tradeoff is that a dark fabric holds more heat at the glass line.

Light fabric colors: White and beige reflect more solar energy back out and keep the fabric cooler, but they scatter light across the weave, which washes out the view and can produce its own soft glare. It's a real choice, not a color preference.

Reverse roll on solar fabric: Rolling the fabric off the front of the tube stands the screen off the glass by an inch or so, which keeps it clear of hardware and lets a little air move in the space behind it. Useful on hot southern exposures.

Cassette headbox: A closed box hiding the tube, which matters more on solar than on other fabrics because an open roll of screen fabric looks like exactly what it is. It also keeps dust out of the weave sitting on top of the roll.

Motorized with a sun sensor: A motor plus a sensor that lowers the shade when the sun actually hits that elevation, or an astronomical timer that runs to sunrise and sunset. It's the version of this product that works when you aren't home to run it.

Layered with a room darkening shade: A second tube on a dual bracket carrying an opaque fabric behind or in front of the screen. The solar shade handles the afternoon, the second shade handles the night, and neither one gets asked to do a job it can't.

Light Control

See What Each Fabric Does To The Light

Pick a fabric below and the window updates. It's a drawing rather than a photograph, so read it as a rough guide to what each family does in a Whitestown room, and to what it doesn't do.

Fabric type

Sheer, 10 percent openness

Ten percent of the weave is open, so you keep the view and most of the daylight. Glare drops a little. After dark, once your lamps are on, someone outside can read shapes through it, which is why this belongs on a view window rather than a bedroom.

Openness factor is printed on the fabric card, so you can compare one line against another before you order anything.

Keeps the viewNot private after dark

Solar, 5 percent openness

The usual pick for a west window or a covered porch. You can still read the yard through it, glare comes down noticeably, and the fabric intercepts a good share of the sun before it reaches you at four in the afternoon.

It also cuts the UV landing on floors and furniture. NFRC puts UV at roughly 40 to 60 percent of fading damage, so this slows fading rather than stopping it.

View and glare controlSlows fading

Solar, 3 percent openness

A tighter weave. The room goes dimmer and the view drops back to an outline. Choose it where the sun is the problem and the view is second, which around here usually means a west wall in July. That's a common call on this side of Indianapolis.

Openness affects how much you see out, not how private you are. A 3 percent fabric still shows silhouettes at night.

View becomes an outlineStrong glare control

Solar, 1 percent openness

Close to a solid fabric with a little view left in it. This is the strongest glare control in the solar family.

The trade is that it darkens the room on a gray January day too. Indianapolis averages a January high near 36F and the light is flat, so think about how the room reads in both seasons before you commit.

Darkest solar optionDim on gray days

Light filtering

No view through it. Daylight comes through the face diffused, so the room stays bright without a hot spot across the television or the kitchen island. This is the default for living spaces.

It isn't private in reverse at night. With the lamps on and the sun down, silhouettes still show.

No view through itBright without the glare

Room darkening

A denser fabric, usually with a liner behind it. Most of the light coming through the face is gone.

Light still arrives around the edges on an inside mount, so a room darkening shade gives you a dim room rather than a dark one. If someone in the house sleeps during the day, say so at the measure and we'll scope it differently.

Dim, not darkEdges stay bright

Blackout

The fabric itself passes essentially no light. What you'll still see is the perimeter. Lutron publishes an inside-mount light gap of about 3/4 inch per side on its Roller 20 and 64 shades, along with a standard factory deduction of 1/16 inch per side, and shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps than that.

So if you need a genuinely dark bedroom, that gap has to be dealt with on purpose, either with side channels or by going outside mount. We tell you which one your opening can carry while we're still standing in the room.

Dark facePerimeter needs a plan

Openness factor is a measured fabric spec, so you can compare it line to line. The category names are not measured. One maker's room darkening can behave like another maker's light filtering, which is why the sample books come to the measure and get opened in the room they're going in, at the hour that room has the problem.

Common Questions

Solar Shades FAQ

Questions we hear most often from Whitestown homeowners considering solar shades.

Three percent is usually the right call there, and sometimes 1 percent. Those lots look across at a distribution building over one million square feet with entitled capacity as high as 8.5 million, plus the pavement and truck court that comes with it, so the problem is bounced light across a wide field of view rather than one shaft of afternoon sun. A tighter weave cuts more of that and still leaves you an outline of what's outside. If your view is the trail corridor or a retention basin instead, 5 percent keeps far more of it and the glare load is lower to begin with.
More than the openness number does, and this surprises almost everyone. A dark fabric absorbs the light bouncing around inside the weave, so your eye reads through it and the view stays sharp, at the cost of the fabric itself looking dark from inside the room. A light fabric bounces that light back at you, so it controls glare on your face but washes out the view. On a Cardinal Pointe elevation looking at open, irrigated course ground, dark fabric is nearly always the answer. In a room where the shade is the visible finish, light fabric wins and you accept the haze.
They slow it, and nobody can honestly promise more. NFRC attributes 40 to 60 percent of fading damage to UV, which means the rest comes from visible light and heat that a shade only reduces. What a solar shade does well is take the direct beam off a specific piece of furniture during the hours it would otherwise sit in full sun. In Whitestown that window of exposure is long, because most rear and west elevations look onto open ground with a street tree canopy that's only 5 to 20 years old and won't do the job for another decade or two.
Very little, and you should plan around that rather than hope. Central Indiana is IECC Climate Zone 5A with a real heating load: January averages a 36.1 degree high and a 20.9 degree low. A solar shade is an open weave designed to let air and a view through, so it isn't holding warm air against the glass. The product with published performance behind it for that season is the cellular shade, where DOE and Oak Ridge National Laboratory testing recorded savings of up to 20 percent of heating energy against a bare window. A common build here is solar on the west rooms and cellular in the bedrooms.
Reflected light comes in low and from an angle the sun never uses, so it slips under anything mounted high and short. Maple Grove has one pond and walking trails inside the plat, and at an average lot of 0.26 acre the houses sit far enough apart that neighboring buildings screen very little. The fix is a shade that can be lowered to the bottom of the opening rather than parked halfway, which usually means a bottom up capable product or simply committing to a full drop for a couple of hours. A dark 3 percent fabric handles bounced light better than a light 5 percent one.
Years, and the failure is gradual rather than sudden. Solar screen fabric is typically a coated yarn woven into a mesh, and what ages is the coating, which gets brittle and dusty long before the weave lets go. Edges and the hem area go first because that's where the fabric flexes every time you raise the shade. In Whitestown, where 14.3 percent of the housing has gone up since 2020 and the lots are open former farmland, the fabric on a west elevation works harder than the same fabric would under an established canopy. Keep the shade rolled up when the room is empty and you buy years.
It's the percentage of the fabric that's open space between the yarns. A 5 percent fabric is 95 percent solid and 5 percent holes. That single number sets the whole tradeoff you're buying, because the holes are what let you see out and the solid part is what cuts the glare. Lower openness means more glare control and less view. Higher openness means more view and less glare control. There's no fabric that gives you both, and anybody who tells you otherwise is selling rather than measuring.
Usually lower than people expect. A west elevation in Whitestown takes direct low sun through the worst part of a summer afternoon, and a 10 percent fabric there will not cut it. We'd normally be at 3 percent, sometimes 1 percent if the room is a home office where screens have to stay readable. Understand what that costs you: at 3 percent the view out is real but muted, and at 1 percent the outside becomes a soft haze rather than a scene.
Darker, by a clear margin, and it surprises people. A charcoal or bronze yarn absorbs light instead of scattering it, so each opening in the weave behaves like a small clear window and the view through stays crisp. A white or beige fabric scatters light across the weave and washes the view out, sometimes producing a soft glare of its own. The counterweight is heat: a light fabric reflects more solar energy back out through the glass, while a dark fabric holds more at the window.
Yes, and this is the disclosure that saves arguments later. A solar shade works by having more light on one side than the other. During the day it's brighter outside, so you see out and nobody sees in. After dark with your lamps on, that reverses exactly: you see your own reflection and somebody on the sidewalk sees into the room. It's physics, not a fabric flaw. If a room needs nighttime privacy, you need a second fabric on a dual bracket.
They help at the window and they do far less than the marketing suggests. Here's the honest mechanism: by the time an interior shade is doing anything, the sun's energy has already come through the glass and turned into heat inside the room. A screen fabric absorbs and re-radiates some of that, and a light-colored fabric reflects a share back out, so you feel a real difference standing near that window. An exterior product intercepts sun before it gets in, which is a fundamentally better position. That's the difference.
It slows it. NFRC attributes roughly 40 to 60 percent of fading damage to ultraviolet light, with the rest coming from visible light and heat, so no interior fabric ends the problem. Solar screens block a substantial share of UV and cut visible light too, so a hardwood floor or a leather chair in front of south glass ages noticeably slower behind one. What we won't tell you is that a solar shade protects anything completely, because it doesn't, and the fabric only works while it's down.
Reasonably, and it depends on the openness. At 1 or 3 percent, someone standing outside in daylight sees a screen rather than a room, and that's genuine daytime privacy. At 10 percent, a person close to the glass can make out shapes and movement inside. So openness is doing double duty here: it's your glare setting and your daytime privacy setting at once. What it never provides is privacy after dark once the lights are on inside.
Because you'd be paying for a view you then throw away. The whole reason to buy a solar shade instead of a room darkening roller is that you want to keep looking outside while the glare goes away. At 1 percent the outside is a haze, which is right on a brutal west window and wrong on a north window where there was never much glare to fight. Buying openness room by room is how this product earns its price, and it's why we walk elevations before quoting.
Mechanically nothing. A solar shade is a roller shade, same tube, same brackets, same clutch or motor. The difference is entirely the fabric: an open-weave screen designed around a published openness percentage instead of a fabric designed around opacity and appearance. So the decision tree is different. On a roller you're choosing how much light to block. On a solar shade you're choosing how much view to keep while cutting glare, which is a genuinely different question.
They do, and a slider is often the best case for one, since patio glass throws afternoon light across an entire room and you don't want to lose the view of the yard. The things to plan are width and clearance. A wide opening may want two coupled tubes running on one line so they track together, and the hembar has to clear the door handle and the track at the bottom. Reverse roll helps where the fabric would otherwise foul hardware in the opening.
Usually, and the fix is about angle as much as fabric. Screen glare comes from a bright source reflecting off the display, so what matters is cutting the intensity of the light behind and beside you. A 3 percent fabric on the offending window normally does it, and 1 percent handles the worst west exposures. Where it doesn't work is when the sun is low enough to come in under the hembar, which is why we sometimes extend an outside mount lower rather than going tighter on the weave.
Yes, on a dual bracket, and it's the honest answer rather than a way to sell two shades. One bracket carries two tubes at the same opening. The screen handles the afternoon while keeping your view, and an opaque fabric drops at night for real privacy or for sleeping. Trying to get both from a single fabric always disappoints in one direction. The pair needs mounting depth, so we measure for it at the start instead of adding a second shade later.
On a bank of sun-facing windows, it's the version that actually gets used. A sun sensor lowers the shade when that elevation takes sun rather than when you remember, and an astronomical timer runs to sunrise and sunset through the year. Installed motorization sits nationally at $300 to $1,500 per window. Budget for batteries as an ongoing item: Hunter Douglas states PowerView battery life is about one year, and that's the cost people are least often told about before they sign.
Better than most fabrics, since these are engineered for exactly that. Vinyl-coated polyester screens are the workhorse and they hold color and tension for years on a hard exposure. What ages first is usually the edge that sits exposed on the outside of the roll rather than the body of the fabric, and very fine yarn fabrics are less forgiving than coarser ones. Keeping the shade down through the hottest hours protects the room, which is the whole point of owning it.
Areas We Serve

Solar Shades Across Whitestown

We measure and install in every one of these Whitestown neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Whitestown

Whitestown Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Whitestown

Slats that don't care how humid the laundry room gets

Learn more →

Wood Blinds in Whitestown

Hardwood where the finish shows, and nowhere near the sink

Learn more →

Vertical Blinds in Whitestown

The patio door answer that stacks out of your way

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Whitestown

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Whitestown, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 863-9966
Service area

Serving Whitestown and the surrounding area

Call NowGet Quote