HomeEdmonds Creek at Anson North
Whitestown Neighborhood

Window Treatment Work in Edmonds Creek at Anson North

Custom Whitestown window treatment crews serving Edmonds Creek at Anson North homeowners with free in-home measure, repair, replacement.

Call (317) 863-9966Get Free Assessment
Quick Answer

Neighborhood-specific answers for Whitestown. Window sizes, trim depth and orientation vary street to street, so treat the answers below as the pattern rather than a promise about your particular house.

  • Services: faux wood blinds, wood blinds, vertical blinds, aluminum mini blinds
  • Service area: Edmonds Creek at Anson North, Whitestown, IN and surrounding areas
  • For a new order, plan on a measure appointment, then two to five weeks of fabrication, then an install visit. For a broken tilt gear or a dead battery, it's usually a single short visit and no waiting.
  • Insured and bonded
  • Serving Whitestown, IN since 2008
About Edmonds Creek at Anson North

Local Window Treatment Experience in Edmonds Creek at Anson North

A window quote at Edmonds Creek is unusually predictable, and one thing about it isn't. The predictable part is the builder: Arbor Homes put up all 107 lots, so opening sizes repeat down Meadowview Drive and Gateway Drive in a way they never would in an older section of town. The part that isn't predictable is age. A house from the December 2016 opening has been through eight Indiana winters, and one in the final phase has been through one or none. Same plans, same jambs, a different amount of movement behind them. We measure both the same way and we say different things about what belongs in them.</p><p style="font-size:16px;color:#4a5a6a;line-height:1.75;margin:16px 0 0">The other thing worth saying early is that the 1,600 to 3,200 square foot range roughly doubles the job between the smallest and largest plan in the same community. Expect somewhere near 14 openings at the low end and 26 at the top, which at national custom pricing of $250 to $2,600 per window is a wide spread before anyone has picked a fabric. Arbor doesn't publish a lot size for Edmonds Creek and no parcel level record was retrievable, so sight lines to the neighbor's windows get looked at on site rather than assumed off a plat map.

We have served Edmonds Creek at Anson North homeowners through the full range of window treatment needs, from inspections and repairs to full replacements. Whatever the system, our Whitestown crew approaches every project with clear communication and respect for your property.

The Housing Here

Edmonds Creek at Anson North: 107 Arbor lots, 1,600 to 3,200 square feet

Edmonds Creek at Anson North opened in December 2016 and runs to 107 lots built by Arbor Homes, which makes it the only community in this Whitestown file put up by a regional Indiana builder rather than a national one. Homes run 1,600 to 3,200 square feet. Arbor's published standard specification includes sodded front yards and partial brick, and that partial brick is the most useful fact on this page, because it changes where a tape goes on measure day. The split between single level and two story plans isn't published, though local listings describe well kept ranch homes here, so both are in the mix across that square footage range.

A price band isn't published on Arbor's current community page, and we don't invent one. What is published is the shape of the community: 107 lots, a 2016 start, a final phase still selling in 2026, and a location three miles east of I-65 next to Walker Park and Nature Trail. Whitestown as a whole issued 445 single family permits in the first eight months of 2025, roughly 68 percent of Boone County's total for the period, so a nearly finished 107-lot community sits inside a town still adding houses faster than anywhere else in Indiana. That matters for fabric availability and scheduling, not for the measure itself.

Built
Introduced December 2016; in its final phase and still selling in 2026
Homes
107 lots, all by Arbor Homes
Typical size
1,600 to 3,200 sq ft. Lot size not published at parcel level; measured on site
Styles
Arbor Homes production elevations with partial brick and sodded front yards as standard specification; single level and two story
What It Means For Your Windows

What an Edmonds Creek measure actually runs into

Count on 14 to 26 openings, and note that the range nearly doubles between a 1,600 square foot plan and a 3,200 square foot one on the same street. The casing condition is the constraint. Arbor's production returns are shallow and factory consistent, which is good news for repeatability and awkward news for inside mounts, because a shallow return often won't take a headrail flush. Lutron publishes 3/4 inch of light gap per side on an inside mount roller in the 20/64 range, plus a standard factory deduction of 1/16 inch per side. On a 107-lot community where every opening came from the same builder, that gap shows up identically in every room, which is either fine or maddening depending on the room.

Then there's the brick. Partial brick on the front elevation means the face you see and the frame you mount to aren't in the same plane, so we take finished width off the framed opening rather than the masonry return, and an outside mount on that elevation has to land its brackets in framing above the header rather than in the brick veneer. Squareness is genuinely not the problem here. The whole community is under ten years old and the final phase is under two, so a three point measure at Edmonds Creek confirms rather than searches. What's still true is that the newest houses are moving. A frame screwed tight into an opening in its first heating season, with January averaging a 20.9 degree low, will tell you about it later.

Measure the frame, not the brick

Arbor includes partial brick on the front elevation as standard, so the front of an Edmonds Creek house presents a masonry face over an ordinary framed opening. Finished width and finished height come off the frame. Outside mount brackets on that elevation go into framing above the header, never into the brick veneer, and that decision gets made at the opening rather than from the driveway.

Shallow returns and a published 3/4 inch

Production returns at Edmonds Creek are shallow enough that a flush inside mount is a per opening question rather than a house wide assumption. Where depth is short, the choices are a partial projection inside mount with the headrail proud of the opening, or an outside mount on a mounting board. Lutron's 3/4 inch per side light gap and 1/16 inch per side factory deduction both apply, and you see the number before you order.

Nine build years inside one 107-lot plat

A December 2016 house and a final phase house are the same plans with a different amount of settling behind them. On the older lots we order to the measurement and expect it to hold. On the newest we still order to the measurement, but we steer toward products that tolerate a sixteenth of movement, which rules a rigid shutter frame out of a first winter house.

Walker Park's 11 acres will never be built on

Lots on the park edge look at open public ground with a playground and a fitness trail, and no future building changes that. It's a rare case for keeping the view: a 5 percent openness solar shade holds the sight line while cutting glare. On interior lots where the neighboring house is the view, 3 percent or a light filtering fabric usually wins instead.

What We Specify Here

What we put in an Edmonds Creek house

Four products cover almost every Edmonds Creek order, and the split between them follows the elevation rather than the room. Front openings sit behind partial brick and face the street, so they get whatever gives 107 houses a consistent face. Rear openings on the park edge look at 11 acres of Walker Park that nobody will ever build on, so they get glare control that keeps the view. The rear slider gets its own answer, because a slider is a different mechanical problem from a window. National custom pricing runs $250 to $2,600 per window and shutters $175 to $800 per window, which is the honest range to plan against. No Indianapolis installed pricing is published anywhere.

Cordless light filtering cellular shades

The shallowest stack of anything that works in an Arbor return, and the product that reliably fits when depth is short. DOE and ORNL testing found cellular shades saved up to 20 percent of heating energy against a bare window, worth something in a town where January averages a 20.9 degree low. Cordless lift keeps operating cords out of a house two minutes from a playground.

Solar roller shades at 5 percent openness

For the park edge lots on the rear elevation. Five percent keeps Walker Park and its fitness trail readable through the fabric while taking the edge off afternoon sun on ground with no canopy: Edmonds Creek's street trees are under a decade old and won't shade anything for another fifteen years. Expect the view to dim rather than disappear, and expect glare rather than heat to be what you notice going.

Composite plantation shutters on a Z-frame

The front elevation is where 107 houses look like one community, and a poly shutter holds a straight louver line across it. On a shallow production return the shutter goes into a Z-frame or an L-frame built out over the opening instead of a flush inside mount. Poly rather than hardwood, because central Indiana's muggy season runs 25 May to 22 September and a painted wood stile in a bathroom will move.

Vertical cellular shades for the rear slider

The slider on an Arbor rear elevation is the widest single opening in most Edmonds Creek plans. A vertical cellular tracks across it and stacks to one side without a chain dragging through the traffic path, and it keeps the same cell profile as the shades in the rest of the room, which matters when the great room and the slider are visible in one glance from the kitchen.

Getting Around

Edmonds Creek streets, the park next door, and which district you're actually in

The community address is 5986 Meadowview Drive, and the street names in and around Edmonds Creek are Meadowview Drive, Gateway Drive, Schooler Drive, Tanglewood Lane and Main Street. Walker Park and Nature Trail sits immediately adjacent at 11 acres, with a playground, open green space and a fitness trail. Panther Park is west of Main Street. I-65 is three miles west. The school assignment is the thing people get wrong: Edmonds Creek carries the Anson name, and Anson makes buyers think Zionsville, but this community goes to Perry Worth Elementary, Lebanon Middle School and Lebanon Senior High School under Lebanon Community School Corporation. That split runs down the middle of Whitestown. It changes nothing about a shade order, and it comes up on every visit.

Streets we work on
Meadowview DriveGateway DriveSchooler DriveTanglewood LaneMain Street
Around the neighborhood
Walker Park and Nature Trail, an 11-acre park with a playground, open green space and a fitness trail, immediately adjacentPanther Park, west of Main StreetI-65, three miles west
Lebanon Community School Corporation
Perry Worth ElementaryLebanon Middle SchoolLebanon Senior High School
Services

Window Treatment Services in Edmonds Creek at Anson North

Every service Whitestown Window Treatments offers across Whitestown is available to Edmonds Creek at Anson North homeowners.

Faux Wood Blinds in Edmonds Creek at Anson North

Slats that don't care how humid the laundry room gets

Learn more →

Wood Blinds in Edmonds Creek at Anson North

Hardwood where the finish shows, and nowhere near the sink

Learn more →

Vertical Blinds in Edmonds Creek at Anson North

The patio door answer that stacks out of your way

Learn more →

Aluminum Mini Blinds in Edmonds Creek at Anson North

Cheap, thin, honest, and wrong for a dark bedroom

Learn more →

Roller Shades in Edmonds Creek at Anson North

One clean line across a long, low wall of glass

Learn more →

Solar Shades in Edmonds Creek at Anson North

Cut the glare, keep the view, know the tradeoff

Learn more →

Cellular Shades in Edmonds Creek at Anson North

The only shade with real energy testing behind it

Learn more →

Zebra Shades in Edmonds Creek at Anson North

Two positions, one tube, and one honest limitation

Learn more →

Roman Shades in Edmonds Creek at Anson North

Fabric folds for the rooms you actually decorate

Learn more →

Woven Wood Shades in Edmonds Creek at Anson North

Texture for houses that were built without any

Learn more →

Blackout Shades in Edmonds Creek at Anson North

Dark rooms need hardware, not just dark fabric

Learn more →

Plantation Shutters in Edmonds Creek at Anson North

Built into a frame because your walls have no trim

Learn more →

Cafe Shutters in Edmonds Creek at Anson North

Half the window covered, and we'll say what that costs

Learn more →

Motorized Shades in Edmonds Creek at Anson North

Great on the high glass, honest about the batteries

Learn more →

Custom Drapery in Edmonds Creek at Anson North

The vertical line a 2016 builder elevation never had

Learn more →

Valances & Top Treatments in Edmonds Creek at Anson North

The top edge your builder never put on the window

Learn more →

Exterior Solar Shades in Edmonds Creek at Anson North

Stop the heat outside the glass, and guide the fabric

Learn more →

Retractable Awnings in Edmonds Creek at Anson North

Shade in one season instead of twenty years

Learn more →

Commercial Window Treatments in Edmonds Creek at Anson North

Repeatable specifications for buildings that keep growing

Learn more →

Skylight Shades in Edmonds Creek at Anson North

Overhead glass needs tension, not just fabric

Learn more →

Sliding Glass Door Blinds in Edmonds Creek at Anson North

The stack belongs off the panel you actually use

Learn more →

Panel Track Blinds in Edmonds Creek at Anson North

Wide flat panels for a long, low wall of glass

Learn more →

Sheer Shades in Edmonds Creek at Anson North

Soft vanes that spread light instead of slicing it

Learn more →

Pleated Shades in Edmonds Creek at Anson North

The shallowest stack you can buy, and no air pocket

Learn more →

Bamboo Shades in Edmonds Creek at Anson North

Natural weave for rooms a builder left plain

Learn more →

Dual Shades in Edmonds Creek at Anson North

Two positions on one tube, and the tube must be level

Learn more →

Top-Down Bottom-Up Shades in Edmonds Creek at Anson North

Daylight above and privacy below, at twice the hardware

Learn more →

Cordless Blinds in Edmonds Creek at Anson North

No cord to reach, and a spring that eventually tires

Learn more →

Hardwood Shutters in Edmonds Creek at Anson North

Wood where the finish shows, composite where it gets wet

Learn more →

Composite Shutters in Edmonds Creek at Anson North

Panels that ignore humidity, sized to their own weight

Learn more →

Smart Home Shade Integration in Edmonds Creek at Anson North

Pick the radio first, then worry about the app

Learn more →

Blind Repair & Restring in Edmonds Creek at Anson North

Repaired when the part exists, replaced when it doesn't

Learn more →

Shutter Repair in Edmonds Creek at Anson North

Confirm the panel can be matched before anything comes off

Learn more →

Motorization Retrofit in Edmonds Creek at Anson North

Motors into headrails that will actually take one

Learn more →

Outdoor Patio Shades in Edmonds Creek at Anson North

Anchored into structure, and up before the wind arrives

Learn more →

Office Window Treatments in Edmonds Creek at Anson North

Glare is an openness decision, reach is a code decision

Learn more →

Healthcare Window Treatments in Edmonds Creek at Anson North

Cordless and cleanable, with the report in the submittal

Learn more →

Multifamily Window Treatments in Edmonds Creek at Anson North

One spec per floor plan, and a dye lot plan

Learn more →
Service Area

Whitestown and Everything Within a Short Drive

Edmonds Creek at Anson North is one of several Whitestown communities we serve. We measure and install across Whitestown, Boone County, and surrounding areas.

Common Questions

Edmonds Creek at Anson North Window Treatment FAQ

Questions we hear most often from Edmonds Creek at Anson North homeowners.

Between 14 and 26, depending on where your plan falls in Edmonds Creek's published 1,600 to 3,200 square foot range. The low end is a small single level plan with a front elevation, a rear slider and bedroom openings. The top end roughly doubles it. We count on site rather than off a plan name, because Arbor doesn't publish a plan by plan window schedule for the community and the final phase homes carry options the early 2017 houses didn't. At national custom pricing of $250 to $2,600 per window, that count is the number that moves a quote most.
Yes, and it's the most common measuring mistake in this community. Arbor includes partial brick as standard specification, so on the front elevation the masonry face and the framed opening sit in different planes. Measuring to the brick gives you a finished width that's wrong by whatever the return happens to be. We take the frame. For an outside mount on that elevation we set brackets into framing above the header rather than into the veneer, and we check it before quoting rather than discovering it on install day.
Five percent on the rear elevation is where most park edge Edmonds Creek homes land. Walker Park and Nature Trail is 11 acres of permanently open public ground, so the view is worth keeping, and 5 percent openness lets you read the fitness trail through the fabric while cutting glare. Three percent gives more control and less view. Ten percent is mostly view. Because Edmonds Creek's street trees are under a decade old, no canopy is helping you, so the fabric is doing the whole job for now.
Sometimes, and never as a blanket assumption. Arbor's production returns are shallow, and a shutter frame needs real depth to sit flush. In most Edmonds Creek openings the answer is a Z-frame or L-frame built out over the opening, which reads well and costs about the same, national shutter pricing being $175 to $800 per window. We measure usable depth at every opening before writing it up, because a house with 20 openings can easily have three that take an inside mount and 17 that don't.
Not too new to order, but new enough to choose differently. A final phase house has been through one heating season at most, and central Indiana asks a lot of new framing: January averages a 36.1 degree high and a 20.9 degree low. Cellular shades, rollers and blinds all tolerate a sixteenth of movement without complaint. A rigid shutter frame screwed tight into an opening in its first winter is the one thing we'd hold off on, usually until the house has a full year behind it.
Close, not identical. Fabric is dyed in batches, and two Edmonds Creek orders placed a year apart will almost certainly come from different dye lots. Side by side in one room you'd see it. On separate floors you usually wouldn't. If matching matters, we order the whole house at once and hold the spare, or we choose a fabric where the variance is least visible. Custom lead time is 2 to 5 weeks either way, so there's no premium for doing it together.
Send a Message

Free Assessment in Edmonds Creek at Anson North

Schedule a free, no-obligation window covering inspection. We respond promptly to all Edmonds Creek at Anson North inquiries.

Service Area
Edmonds Creek at Anson North, Whitestown, IN
Service area

Serving Whitestown and the surrounding area

Call NowGet Quote